Performance and emission comparison of a supercharged dual-fuel engine fueled by producer gases with varying hydrogen content

This study investigated the effect of hydrogen content in producer gas on the performance and exhaust emissions of a supercharged producer gas–diesel dual-fuel engine. Two types of producer gases were used in this study, one with low hydrogen content (H₂ = 13.7%) and the other with high hydrogen content (H₂ = 20%). The engine was tested for use as a co-generation engine, so power output while maintaining a reasonable thermal efficiency was important. Experiments were carried out at a constant injection pressure and injection quantity for different fuel–air equivalence ratios and at various injection timings. The experimental strategy was to optimize the injection timing to maximize engine power at different fuel–air equivalence ratios without knocking and within the limit of the maximum cylinder pressure. Two-stage combustion was obtained; this is an indicator of maximum power output conditions and a precursor of knocking combustion. Better combustion, engine performance, and exhaust emissions (except NO_x) were obtained with the high H₂-content producer gas than with the low H₂-content producer gas, especially under leaner conditions. Moreover, a broader window of fuel–air equivalence ratio was found with highest thermal efficiencies for the high H₂-content producer gas.     

Purification and gene cloning of a chitosanase from Bacillus ehimensis EAG1

Bacillus ehimensis EAG1 (IFO15659) produced and secreted chitosanase in the presence of exogenous chitosan. The chitosanase was purified from the culture filtrate of the bacterium to apparent homogeneity in SDS-polyacrylamide gel electrophoresis. The purified enzyme had a molecular weight of approximately 31,000. A 1.9-kbp DNA fragment containing the chitosanase gene was cloned and the complete nucleotide sequence was determined. The sequence was found to contain a single open reading frame encoding a protein of 302 amino acids. The deduced amino acid sequence showed significant homology with the chitosanase from Bacillus circulans MH-K1.     

Influence of Gradual Elongation to the Patella Tendon Insertion in Rabbits

The purpose of this study was to examine the histological changes at the patella tendon (PT) insertion site under gradual elongation in rabbits. Gradual elongation of the PT was performed using external fixation for 4 weeks, with a lengthening speed of 0.5 mm/day (elongation group; n = 24). Rabbits in the sham group underwent the same surgical procedure without gradual elongation (sham group; n = 24). Eight animals were sacrificed 1, 2 and 4 weeks after surgery in each group, respectively. Average thicknesses of stained glycosaminoglycan (GAGs) areas by Safranin-O staining in the total cartilage layer and the uncalcified fibrocartilage layer in the elongation group were significantly higher than that in the sham group at 4 weeks (p < 0.05) and that in the intact PT group (n = 6, p < 0.05). In the elongation group, the peak in the average thicknesses of the stained GAGs areas in the total cartilage layer and the uncalcified fibrocartilage layer were observed at 4 weeks. Gradual elongation of PT insertion significantly affected the increase in the average thicknesses of the stained GAGs areas in the cartilage layer especially in the uncalcified fibrocartilage layer at 4 weeks in rabbits. Clinically, insertions of tendon and ligament can extend during gradual elongation using external fixation more than 4 weeks after the operation.     

Mathematical modeling of meniscus profile and melt flow in electromagnetic casters

The paper describes a mathematical model which predicts the meniscus shape and melt flow in an electromagnetic caster. Computations were carried out for the two types of caster (with and without a screen to shape the magnetic field) in commercial use. The dependence of meniscus shape on parameters such as inductor geometry, placement, current, and frequency, as well as screen properties and placement, was determined. Calculated velocities showed agreement with measurements of other investigators on a physical model and an actual caster. The effect of an auxiliary low frequency inductor on melt flow was also computed.     

Determination of substituent distribution in cellulose ethers by means of a C nuclear magnetic resonance study on their acetylated derivatives: 3. Hydroxyethylcellulose

The distribution of substituent, i.e. oligo(ethylene oxide) groups, in hydroxyethylcelluloses having various values of molar substitution was determined by means of ¹³C nuclear magnetic resonance after the acetylation of hydroxyl groups both at the unsubstituted position in the anhydroglucose unit and at the substituent end position of the parent hydroxyethylcellulose. The acetyl carbonyl signal of the acetylated hydroxyethylcellulose samples was found to split into a triplet in DMSO-d₆ at 100°C corresponding to the positions of acetyl groups (2, 3 or 6 overlapped with the substituent end) on the anhydroglucose unit. While in CDCl₃ at 40°C, the acetyl carbonyl signal for the substituent end position was observed to be separated from those on the anhydroglucose unit. By combining these results, the distribution of the substituent groups was determined for a series of hydroxyethylcellulose samples of a wide range of molar substitution values.     

Separability of SO2 from SO2/N2 mixture through sulfoxide-modified poly(vinyl alcohol) and cellulose membranes

Separability of SO₂ from mixtures of SO₂ and N₂ gases was studied for membranes of poly(vinyl alcohol) (PVA) and cellulose modified with methyl, ethyl, t-butyl, and phenyl vinyl sulfoxides. Of these sulfoxide-modified polymers, the phenyl vinyl sulfoxide-modified PVA membranes were found to give the best separation of SO₂. In the phenyl vinyl sulfoxide modified PVA membranes, the permeability coefficient of SO₂ increased with sulfoxide content while separability of SO₂ was maximum at a sulfoxide content of 23.5 mol %; the separation factor of SO₂ was about 170 at this sulfoxide content. © 1993 John Wiley & Sons, Inc.     

Sweet and bitter constituents of Wilbrandia species

Two novel cucurbitane glycosides, wilbrandisides A and B were isolated as sweet-taste substances from the root of Wilbrandia species (Cucurbitaceae) along with seven known cucurbitane glycosides. Their structures were determined by spectroscopic means, including two-dimensional NMR experiments. Their sweet-taste properties were evaluated by a human sensory panel test. Consequently, wilbrandiside A was shown to be 28 times sweeter than sucrose and was the compound having the most potent sweet taste of all the cucurbitane glycosides isolated from this plant.     

Tea catechins modulate the glucose transport system in 3T3-L1 adipocytes

In this study, we investigated the effects of tea catechins on the translocation of glucose transporter (GLUT) 4 in 3T3-L1 adipocytes. We found that the ethyl acetate fraction of green tea extract, containing abundant catechins, most decreased insulin-induced glucose uptake activity in 3T3-L1 cells. When the cells were treated with 50 μM catechins in the absence or presence of insulin for 30 min, nongallate-type catechins increased glucose uptake activity without insulin, whereas gallate-type catechins decreased insulin-induced glucose uptake activity. (-)-Epicatechin (EC) and (-)-epigallocatechin (EGC), nongallate-type catechins, increased glucose uptake activity in the dose- and time-dependent manner, whereas (-)-catechin 3-gallate (Cg) and (-)-epigallocatechin 3-gallate (EGCg), gallate-type catechins, decreased insulin-induced glucose uptake activity in the dose- and time-dependent manner. When the cells were treated with 50 μM catechins for 30 min, EC and EGC promoted GLUT4 translocation, whereas Cg and EGCg decreased the insulin-induced translocation in the cells. EC and EGC increased phosphorylation of PKCλ/ζ without phosphorylation of insulin receptor (IR) and Akt. Wortmannin and LY294002, inhibitors for phosphatidylinositol 3'-kinase (PI3K), decreased EC- and EGC-induced glucose uptake activity in the cells. Cg and EGCg decreased phosphorylation of PKCλ/ζ in the presence of insulin without affecting insulin-induced phosphorylation of IR, and Akt. Therefore, EC and EGC promote the translocation of GLUT4 through activation of PI3K, and Cg and EGCg inhibit insulin-induced translocation of GLUT4 by the insulin signaling pathway in 3T3-L1 cells.     

Regeneration of granular activated carbon with adsorbed trichloroethylene using wet peroxide oxidation

The objective of this study is to clarify the regeneration of granular activated carbon (GAC) adsorbed trichloroethylene (TCE) using wet peroxide oxidation (WPO). TCE and TOC concentrations decreased during WPO, whereas Cl(-) accumulated in water indicating that TCE was not only decomposed but was also mineralized to Cl(-) and CO(2) using WPO. Regeneration efficiencies (q/q(0)) of GAC regenerated at 150, 165 and 180 degrees C (initial pH 4) were 0.36, 0.45, 0.48, respectively. In addition, regeneration efficiencies of GAC regenerated in the solution of various initial pH (2.5, 3.0, 4.0) at 180 degrees C were 0.71, 0.60, 0.48, respectively. These results suggest that regeneration of GAC is more effective at higher reaction temperature and lower initial pH of the solution. In the repeated regeneration of GAC, the adsorption capacity of GAC for TCE gradually decreased and regeneration efficiency of the regenerated GAC at sixth step was 0.40. The adsorption capacity loss of regenerated GAC is probably due to oxidation of GAC during WPO.